Radioisotope fume hood

Radioisotope fume hoods are generally designed to guard users from radioactive materials. Radioactive isotope is any of the several species of the identical element with different masses whose nuclei are unstable and it'll dissipate the surplus energy by emitting radiation such as alpha, gamma and beta rays. So, when the working persons inhale the radio isotopes, it'll get into different organs and can cause several effects which can may result in death.

Radioisotope fume hoods are specifically designed for people handling radioactive materials. This fume hood is created with stainless-steel internal surfaces with coved seamless welded corners to forestall material build-up and also to stop contamination. To withstand the burden of lead shielding plates and lead laced sashes, specially constructed worktops are provided. These fume hoods will also provide containment performance kind of like that of high-performance low velocity fume hoods. It should be ensuring to produce maximum safety during working with radiopharmaceuticals and other radioactive materials

This hood is created from double wall construction for greater strength and robustness. The superstructure of radioisotope hoods is usually made stronger than that of conventional hoods so as to support lead bricks and other shieling required within the hood. Interior stainless steel work surface should be water tight and reinforced to ensure the support up to 200 lbs per square foot.

Technical specifications

MOC	CRCA 18G Epoxy powder coated
Stand	SS 304 pipe
Working table top	SS 304 powder coated sheet covered SS 304 sheet
Exhaust system	Motor Blower assembly covered with GI sheet
Sash/Door	Vertical folding type
Air velocity	0.5 m/s
Noise Level	65 dBA
Glass window	Two layer toughened glass, 5 mm thickness
Adjustable height	Motor control
Make up air	Air needed to replace the air exhausted from a room by the fume hood and other ventilation devices
Face velocity	The velocity of the air passing through the work opening of the fume hood measured in the plane of the sash. Measured in feet per minute (fpm), or liters per minute
Electrical fittings	Electrical sockets and MCB switch
Illumination	Fluorescent lamp or UV lamp
Optional accessories	HEPA Filter, Caster wheels, Horizontal sash, SS 314 / SS 316 MOC, Temperature indicator, Face Velocity Meter, Airflow Indicator, Audio / Visual alarm
Power supply	220 / 230 V

Dimensions

Model No.	CFM @29″	CFM @18″	Super structure (WxHxD mm)			Worktop (WxHxD mm)			Hood opening (WxH mm)
			W	H	D	W	H	D	W	H
DRFH-90	567	354	915	1425	845	915	40	762	660	740
DRFH-120	833	521	1220	1425	845	1220	40	762	965	740
DRFH-150	1100	688	1525	1425	845	1525	40	762	1270	740
DRFH-180	1367	854	1830	1425	845	1830	40	762	1575	740
DRFH-240	1900	1188	2440	1425	845	2440	40	762	2185	740